Upgrade your frontage with SuDS Compliant Driveways in Shortlands that look smart and manage rainwater properly. We install permeable paving, resin bound and gravel grid systems built for long-term performance. Designed to reduce surface water run-off and keep you on the right side of planning rules.
Response within 24 hours
Shortlands homeowners want driveways that suit period architecture while coping with heavier downpours. Our designs are built around SuDS principles, helping rain soak through rather than rushing into the street. We regularly work near Shortlands station and around BR2, where off-street parking is at a premium. The result is a smarter entrance with practical drainage built in.
From large Edwardian houses and Victorian villas to well-kept 1930s properties, Shortlands has front gardens that vary widely in levels and access. We tailor sub-bases, edges and falls to match each plot, whether you need a single bay or a wider family driveway. If you’re close to Bromley or Beckenham, we can also plan for higher traffic and tighter turning space. Every scheme is laid out to complement brickwork, boundary walls and planting.
We start with a site survey, measure levels, and confirm where water will infiltrate or be routed to a soakaway system. You’ll receive a clear written specification covering materials, drainage design and maintenance. Our teams work tidily, protect entrances, and keep access safe throughout the job. Fine Landscaping is trusted locally because we deliver consistent finishes, transparent communication, and a 10-year workmanship warranty.
Across the London Borough of Bromley, we often find mixed ground conditions and varied front garden levels, especially around older streets near St Mary’s Church. We design sub-bases and soakaway sizing to suit infiltration rates and avoid water tracking towards the house. Access and parking can be tight, so we plan deliveries and waste removal to minimise disruption. If required, we’ll advise on dropped kerbs, thresholds and drainage interfaces to meet local expectations.
Rated 4.9/5 from over 280 verified reviews
Costs depend on size, excavation depth, access, and the SuDS solution required. As a guide, gravel grid systems often start around £90–£140 per m², permeable block paving typically falls between £120–£190 per m², and resin bound surfaces are commonly £130–£220 per m². If a new soakaway or complex drainage design is needed, allow extra for groundworks and materials after a site survey.
Most projects take 3–7 working days from excavation to final finish, depending on driveway size and the chosen surface. Resin bound installations can be quicker once the base is prepared, while permeable paving may take longer due to edge restraints and detailed laying patterns. Timescales are affected by access for machinery, waste removal, weather, and whether we’re installing a soakaway system or regrading levels near the property.
In many cases, a new or replacement driveway is permitted development if it uses a permeable surface or drains to a permeable area within your boundary. However, rules can change for listed buildings, conservation areas, or where works alter access significantly. We check the requirements for your plot in the London Borough of Bromley, advise on SuDS-compliant options, and design the drainage so the installation is more likely to meet the guidance.
We provide a 10-year workmanship warranty on our driveway installations, covering issues caused by installation defects such as poor levels, unstable sub-base build-up, or edge restraint failure. Manufacturer warranties may also apply to specific products, such as resin systems or paving components. The warranty assumes normal domestic use and reasonable maintenance, and we’ll explain care requirements (cleaning, weed control and avoiding heavy point loads) before completion.
We offer permeable block paving in a range of colours and laying patterns, resin bound surfaces with natural aggregates for a seamless look, and gravel grids for a traditional finish with better stability. We can also integrate soakaway systems, channel interfaces where needed, and thoughtful edging to suit Victorian and Edwardian frontages. During the survey, we’ll help you choose finishes that match your home, budget, and drainage requirements for suds compliant driveways shortlands area.
Get your free, no-obligation quote today.