Bring tired outdoor surfaces back to life with Jet Washing in Biggin Hill. We lift grime, algae and tyre marks from driveways, patios, paths and walls with care and control. Clear results, minimal disruption, and a finish you’ll be proud of.
Response within 24 hours
Outdoor surfaces in Biggin Hill take a battering from rain, leaf litter and shaded areas, leaving slippery algae and ingrained dirt behind. Our jet washing service refreshes driveways, patios and paths without the harsh approach that can damage joints or surfaces. We regularly work near Biggin Hill Airport and around Valley Recreation Ground, where moss and grime build up quickly. If you’re in TN16, we’ll help you get a cleaner, safer entrance and garden.
Biggin Hill’s semi-rural setting means many homes have larger driveways, block paving and long garden paths that show wear over time. We’re used to cleaning around large detached houses, bungalows and period properties where careful pressure control matters. In areas such as Aperfield and Cudham, we often see shaded patios and decking that become slippery after damp spells. Our approach is tailored to the surface and the way the space is used day to day.
We start with a quick inspection, then choose the right pressure, nozzle and method for your material. Where needed, we pre-treat algae and lichen, rinse thoroughly, and tidy up so runoff and debris are managed responsibly. Homeowners choose us for consistent results, respectful working practices and clear communication from start to finish. For jet washing Biggin Hill area properties, we focus on a clean finish that lasts, not just a quick blast.
Working in the London Borough of Bromley, we’re used to mixed surfaces—block paving, concrete, stone flags and timber decking—often with moss from nearby trees and open land. Access can involve long drives and shared entrances, so we plan equipment placement and hose runs to keep walkways clear. We’re mindful of parking and water use on residential roads, and we adjust pressure to suit older pointing and period property features. This is jet washing in London Borough of Bromley done with care, not guesswork.
Rated 4.9/5 from over 280 verified reviews
Most jet washing in Biggin Hill is priced around £2–£6 per square metre, depending on surface type and how ingrained the dirt is. Typical jobs come in at roughly £100–£350 for a driveway, patio, or a combination of smaller areas. Heavy algae, oil staining, awkward access, or delicate materials can increase the time on site and therefore the cost. We’ll confirm a sensible range after a quick assessment.
Most jobs take around 2–6 hours, depending on the size of the area and the level of build-up. A small patio or path can be completed quickly, while larger driveways or multiple surfaces (patio plus walls and fencing) take longer. Stubborn algae, heavy staining, or detailed edges and steps add time, as does careful work around older pointing. We’ll give you a realistic timescale before we start.
Jet washing is usually classed as routine exterior cleaning, so planning permission isn’t normally required for driveways, patios, paths or walls. That said, we still work responsibly—managing runoff, avoiding overspray, and keeping public footways clear where relevant. If your property has restrictions (for example, listed status or special conditions), we’ll flag anything that might affect the work. We can also advise on best practice for drainage and cleaning products.
Yes. We back our workmanship with a 10-year warranty on relevant landscaping works we carry out, and we apply the same high standards to our cleaning services. For jet washing, this covers the quality of our work and care taken to avoid unnecessary damage when the correct method is followed. It doesn’t cover re-soiling from weather, traffic, or new staining after the clean. We’ll explain what’s covered for your specific surfaces.
We clean block paving, concrete, natural stone patios, porcelain, brick walls, timber or composite decking, fencing, and garden paths. We’ll advise on the safest method for each surface—standard pressure washing, lower-pressure rinsing, or pre-treatment for algae and lichen. If you’re considering improvements after cleaning, we can discuss options such as re-sanding block paving joints, applying appropriate sealers, or planning a maintenance schedule. We help you choose what suits your property and usage.
Get your free, no-obligation quote today.