Restore your kerb appeal with Driveway Cleaning in Cheam. We lift grime, moss and oil marks safely, then finish with re-sanding or sealing for a crisp, long-lasting result.
Response within 24 hours
Driveways in Cheam take a battering from traffic film, leaf tannins and winter algae. If your paving looks tired near Cheam Village or after dog walks through Nonsuch Park, a professional clean makes a visible difference fast. We treat weeds, remove moss and rinse away ingrained dirt without damaging the surface. Expect a noticeably brighter finish and improved slip resistance.
The Cheam area has a mix of period cottages, 1930s houses and larger executive homes, often with block paving, tarmac or resin-bound driveways. Many properties in SM2 and SM3 have wide frontages and patterned paving that can lose definition as jointing fills with silt. We tailor pressure settings and detergents to suit your material and age of surface. That means better results with less risk of pitting or dislodged blocks.
Our process starts with a careful inspection, pre-treatment for moss and algae, then controlled pressure washing with edge detailing. For block paving we can re-sand joints and apply an optional sealant to help slow regrowth and staining. We use professional weed treatments where appropriate and take care around drainage channels and thresholds. Homeowners choose us for consistent workmanship, clear pricing and tidy, respectful working practices.
We regularly work across the London Borough of Sutton, including North Cheam and Worcester Park, where tree cover and shaded drives encourage algae. Many streets have limited parking, so we plan equipment access and keep hoses tidy to minimise disruption. We also adapt to older drainage layouts common around conservation areas, managing run-off responsibly. The result is driveway cleaning in London Borough of Sutton that looks right and lasts longer.
Rated 4.9/5 from over 280 verified reviews
Most projects fall between £3–£8 per square metre, depending on surface type, level of staining and whether you want extras like oil stain removal, re-sanding or sealing. As a guide, typical total costs are around £150–£400 for many Cheam driveways. Larger executive-home driveways or heavily neglected paving can cost more, while smaller front drives may sit at the lower end.
Driveway cleaning is usually completed in around half a day for an average-sized driveway. Timing depends on the area in square metres, how much moss and weed growth needs treating, and whether oil stains require dwell time. Re-sanding and sealing add time, and sealing needs suitable dry weather. We’ll confirm an expected schedule after a quick look at the surface and access.
In most cases, driveway cleaning is classed as routine maintenance and doesn’t require planning permission. However, we still take care with run-off, especially if your property is near a conservation area or has older drainage. The London Borough of Sutton may have guidance on water discharge and chemical use, so we work responsibly and can advise if anything looks unusual. If in doubt, we’ll help you check.
Yes. We back our workmanship with a 10-year warranty on sealing applications where we supply and apply the sealant to a suitable surface. This covers issues such as premature sealant failure due to application defects, subject to normal wear, correct curing conditions and reasonable maintenance. Cleaning results can vary with weather and usage, but we always aim for a consistent finish and will address any concerns promptly.
We clean and restore common driveway materials including block paving, resin-bound surfaces, tarmac and concrete. After cleaning, many clients choose re-sanding for block paving, plus sealing in either a natural matt or enhanced “wet look” finish. For stained areas we can focus on targeted oil stain treatments. We’ll recommend the best approach based on your surface condition, drainage, and how you use the driveway day to day.
Get your free, no-obligation quote today.